System Overview
1-6
ACUSON Cypress™ Operator’s Manual
Logging Off
There are two log off methods:
Manual
— each user logs themselves off of the system when they are ready.
Auto-Logoff
— users are automatically logged off when there is no activity
on the system for a specified time. The system Administrator sets the time in
the Setup menu.
In both cases once the logoff occurs the Cypress system will not respond until a
valid User name and Password are entered and [
OK
] is selected.
Manual Logoff
To manually log off the system, follow these steps:
1.
Press the
SETUP
function key.
2.
Select the
Shutdown
tab.
3.
Click the [
LOG OFF
] button. The
Logon
dialog box will open and the system
will not respond until a valid user name and password are entered.
Automatic Logoff
An automatic logoff occurs when the system Administrator has
Enabled
the
Automatic Logoff option and there is no system activity (i.e., nothing on the key-
board is pressed or touched) for the specified time.
The time choices for automatic logoff are 15, 30, 45, and 60 minutes. If the
imaging system is active, and there is no activity in the specified time (e.g., 60
minutes) the Cypress freezes and the logon screen will be displayed — no sys-
tem activity will be allowed until a user successfully logs on.
To set an automatic logoff, follow these steps:
1.
Press the
SETUP
key.
2.
Doubleclick the
User Accounts
option.
3.
On the right side of the screen click the
Enabled
box.
4.
Use the pull-down menu to select the number of minutes that the system
should wait before freezing.
