Siemens ACUSON Antares, Instructions For Use Manual

Page: 171 / 230

4 S y s t e m S e t u p
[ 1 ] I N S T R U C T I O N S F O R U S E
4 - 27
Configuring the Print/Store Function
You can designate a PRINT/STORE key for saving and/or printing, choose
the output format for saved and printed images, configure additional
storage, and set print options, such as print timing. Use the system presets
to set this configuration.
Assigning Functions to the Print/Store Keys
Use the system presets to assign print and/or store functions to each
PRINT/STORE key. These keys are located on the control panel.
When you press a
PRINT/STORE
key that is assigned the store function,
the system stores the image to its hard disk ( Local Database ).
To assign the print function to a PRINT/STORE key:
1. Press the Presets key located on the keyboard, or select the Presets
shortcut button at the bottom of the screen.
2. Select the Print/Store menu on the left of the screen.
The system displays the Print/Store menu. In the Print Routing
section on the upper right of the screen, the system displays a graphic
for each
PRINT/STORE key. Under each PRINT/STORE key graphic are
drop-down menus for printer selection and a Store check box.
3. Select a printer for each drop-down menu located under the graphic for
the required PRINT/STORE key:
–
BW (black and white images).
– Color Doppler (images with color).
–
Tinted (images with tint; map 5-11 for 2D-mode or M-mode, map
4-11 for Doppler).
–
2D Ref (images with color in the 2D portion).
–
Misc
(secondary capture images).
Print/Store