WEB USER INTERFACE (WEBUI)
_______________________________________________________________________________________________________________
4-62
SIG-00-13-12 February 2021
Version No.: B
•
GEO I/O - Module Reset
A GEO module can be reset by right clicking the mouse on the Module Label. A pop-up menu will appear, select
Module Reset
and click the mouse. A pop-up window will appear displaying the module is being rebooted.
WARNING
SITE EQUIPMENT MUST BE PLACED IN THE MAINTENANCE MODE
AND APPLICABLE SAFETY PRECAUTIONS IN PLACE TO PROTECT
VEHICLES, PEDESTRIANS, AND RAILWAY TRAFFIC. THE RESETTING
OF MODULES WILL CAUSE THE GEO TO ENTER A
RESTRICTIVE/SAFE STATE. IT IS THE RESPONSIBILITY OF THE
RAILROAD OR AGENCY TO ENSURE QUALIFIED PERSONNEL
PERFORM FILE UPLOADING AND ADEQUATE TESTING PRIOR TO
PLACING EQUIPMENT BACK INTO SERVICE.
NOTE
Verify the browser's pop-up blocker is NOT on to allow the information
window to appear.
Figure 4-94 GEO I/O - GEO Module Reset
Right
Click
