Siemens A80672 Installation & Operation Manual Download

Page: 91 / 128

WEB USER INTERFACE (WEBUI)

_______________________________________________________________________________________________________________

4-57

SIG-00-13-12 February 2021
Version No.: B

4.1.4.5

Online Status

The Online Status lists in real time the status of the components of the selected device. The Online Status

comes up running and collecting data. To stop the Online Status stream click on the

Stop

button. To restart the

Online Status stream click on the

Start

button. Save the Online Status data collected by clicking on the

Save

button. A pop-up screen will appear providing options for viewing the data or saving to a file. Click on the

Clear

button to erase the data collected.

Figure 4-87 Status Monitor - Online Status

Date/Time stamp from GEO

System.

Mnemonic for interface or

parameter.

Stop the Logging

Start the logging

Summary of Contents for A80672

































































































































Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands

Siemens A80672, Installation & Operation Manual

Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands