Siemens A80672 Installation & Operation Manual Download Page 47

Page: 47 / 128

WEB USER INTERFACE (WEBUI)

_______________________________________________________________________________________________________________

4-13

SIG-00-13-12 February 2021
Version No.: B

Up to six time sources can be selected and arranged in the desired priority. If a time source is not available the

next available source is used. Should a higher priority source become available the PTC Console will be

directed to that source.

Figure 4-18 Preferred Time Source EMP Address Entry

•

PTC - High Availability

The High Availability function enables the user to select up to twelve links to maintain availability to and from the

PTC Console.

Figure 4-19 PTC - High Availability

Summary of Contents for A80672

































































































































Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands

Siemens A80672, Installation & Operation Manual

Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands