INSTALLATION AND CONFIGURATION
2-26
Document No.: COM-00-05-16 June 2006, Revised June 2014
Version: C.1
Figure 2-29. Change Binding IP Address Screen
4.
To keep the current IP address default, press
ENTER
. If not, enter the address for bytes 1
through 4 and then press
ENTER
.
Figure 2-30. Change Binding IP Address Bytes 1 through 4 Screen
The user will be returned to the DHCP Binding Screen.
5.
Select change binding “Left transmit channel”. The Change Binding Left Transmit Channel
screen appears.
Figure 2-31. Change Binding Left Transmit Channel Screen
6.
To keep the transmit channel default, press
ENTER
. If not, enter the transmit channel from 3
to 37 and then press
ENTER
.
The user will be returned to the DHCP Binding Screen.
7.
Select change binding “Left transmit power”. The Change Binding Left Transmit Power screen
appears.
Figure 2-32. Change Binding Left Transmit Power Screen
