Transport | 5
49/174
500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH
Center of gravity
The center of gravity of a panel depends on the degree to which the panel is equipped. The
position of the center of gravity is marked with a symbol on both sides of the panel.
Fig. 24:
Symbol for the center of gravity
Transport eyes
The transport eyes are pre-assembled at the factory. For delivery without low-voltage
compartment and without pressure absorber, the transport eyes must be turned before
transporting the switchgear.
1. Undo the bolt
2
of the transport eyes
1
and turn the transport eyes upwards by 180°.
2. Re-tighten the bolt-and-washer assembly
2
.
Fig. 25:
Turning the transport eyes
Transport facilities
Transport with pallet
Transport with crane rod
Transport with transport eyes
Transport with fork-lift truck
Transport with lifting truck
1
Crane hook
3
Crane rod (Ø 40 mm, observe switchgear weight)
2
Transport pallet
4
Transport eye
Summary of Contents for 8DJH
Page 173: ......
