ESD Directive
B
B.1
ESD guideline
What does ESD mean?
An electronic module is equipped with highly integrated components. Due to their design,
electronic components are highly sensitive to overvoltage and thus to the discharge of static
electricity. Such electronic components or modules are labeled as electrostatic sensitive devices.
The following abbreviations are commonly used for electrostatic sensitive devices:
• ESD – Electrostatic sensitive device
• ESD – Electrostatic Sensitive Device as a common international designation
Electrostatic sensitive devices can be labeled with an appropriate symbol.
NOTICE
Damage to ESD from touch
Electrostatic sensitive devices, ESD, can be destroyed by voltages which are far below the
human perception limit. If you touch a component or electrical connections of a module
without discharging any electrostatic energy, these voltages may arise.
The damage to a module by an overvoltage can often not be immediately detected and only
becomes evident after an extended period of operation. The consequences are incalculable
and range from unforeseeable malfunctions to a total failure of the machine or system.
Avoid touching components directly. Make sure that persons, the workstation and the
packaging are properly grounded.
Charge
Every person without a conductive connection to the electrical potential of his/her surroundings
can be electrostatically charged.
The material with which this person comes into contact is of particular significance. The figure
shows the maximum electrostatic voltages with which a person is charged, depending on
humidity and material. These values conform to the specifications of IEC 61000-4-2.
SITRANS CC240 and SITRANS MX300
Operating Instructions, 06/2021, A5E47280695-AB
81