manualshive.com logo in svg

Siemens 7ME652, Operating Instructions Manual, Page: 23 / 86

Share
Download
Siemens 7ME652 Operating Instructions Manual Download Page 23

Installing/Mounting

4

SITRANS F flowmeters with minimum IP65/NEMA 4X enclosure rating are suitable for indoor 

and outdoor installations.
● Make sure that pressure and temperature specifications indicated on the device nameplate / 

label will not be exceeded.  

WARNING

Installation in hazardous location
Special requirements apply to the location and interconnection of sensor and transmitter. 

See Installation in hazardous area (Page 15) 

4.1

Installation safety precautions

WARNING

High pressure hazard
In applications with working pressures/media that can be dangerous to people, surroundings, 

equipment or others in case of pipe fracture, we recommend that special precautions such as 

special placement, shielding or installation of a pressure guard or a safety valve are taken 

when the flowmeter is mounted.       

Note
Install the sensor in well-supported pipelines in order to support the weight of the flowmeter.

SITRANS FM MAG 5100 W

Operating Instructions, 01/2020, A5E03063678-AC

23

Summary of Contents for 7ME652























































































Reviews:

No comments