manualshive.com logo in svg

Siemens 7ME3510, Operating Instructions Manual, Page: 23 / 214

Share
Download
Siemens 7ME3510 Operating Instructions Manual Download Page 23

 

4

Installing/mounting 

4.1

 

Installation safety precautions 

 

WARNING 

 

High pressure hazard 
In applications with working pressures/media that can be dangerous to people, 

surroundings, equipment or others in case of pipe fracture, we recommend that special 

precautions such as special placement, shielding or installation of a pressure guard or a 

safety valve are taken when the sensor is mounted.     

 

4.2

 

Use according to specifications 

"Use according to specifications" covers:  

●

 

Use within technical limits. 

●

 

Consideration of liquid specifications and references. 

●

 

Consideration of specifications as to installation, commissioning and maintenance. 

●

 

Operating pressure and temperature must be within the limits indicated on the product 

label. 

●

 

Flow and density must be within the specified limits 

Do NOT:  

●

 

Use the flow meter as elastic equalization in pipe systems to compensate for e.g. pipe 

displacement, pipe vibration, expansion, etc. 

●

 

Use the flow meter as footboard for installation purposes. 

●

 

Use the flow meter as support of external loads like pipes, etc. 

●

 

Change the flow meter in any way. For e.g. decomposition of material in connection with 

processing, welding and use of accessories and spare parts not approved by Siemens. 

Note 
If the flow meter is not used according to the specifications, the manufacturer cannot be 

held responsible for any resulting damage. 

 

 

FUP1010 IP67 Portable 
Operating Instructions, 03/2012, A5E02951522-02 

21

 

Summary of Contents for 7ME3510























































































































































































































Reviews:

No comments