Siemens 6GK5 615-0AA00-2AA2 Operating Instructions Manual Download Page 28

Page: 28 / 80

Description of the device

3.8 SET button

SCALANCE S615

Operating Instructions, 10/2022, C79000-G8976-C389-07

3.8

SET button

Position

The SET button is on the front of the housing.

Function

The SET button has the following functions:
•

Restarting the device

To restart the device, press the SET button briefly.

Note

If you make changes to the configuration and restart immediately afterwards with the SET

button, the changes may be lost. If you restart the device using the WBM (menu

command "System > Restart") or using the CLI (command "restart" in the Privileged EXEC

Modus), the configuration changes are always retained.

Summary of Contents for 6GK5 615-0AA00-2AA2

















































































Search results

Summary of Contents for 6GK5 615-0AA00-2AA2

Reviews:

Related manuals for 6GK5 615-0AA00-2AA2

Brands by name

Popular brands

Siemens 6GK5 615-0AA00-2AA2, Operating Instructions Manual

Search results

Summary of Contents for 6GK5 615-0AA00-2AA2

Reviews:

Related manuals for 6GK5 615-0AA00-2AA2

Brands by name

Popular brands