Configuration
4.9 Cloud configuration
SIMATIC CC7
78
Operating Instructions, 10/2019, C79000-G8976-C503-02
4.9.2
Profile
4.9.2.1
Configuring profile
The settings that you configure for the cloud access of the gateway are stored in a profile.
This will make it easier to use the device for different scenarios. Individual settings for
different scenarios can thus be summarized in different profiles without the need to change
the configuration when you switch the cloud.
You can select one of the profiles you have created via the "Profiles" drop-down list.
The activated profile applies to the publisher and the subscriber function of the gateway.
You select the desired cloud for each profile via the "Cloud provider" drop-down list. For the
preset cloud providers, certain parameters are already stored according to the different
requirements of the respective cloud.
Add profile
Create at least one profile in which you save your settings for cloud access.
●
Profile name
Enter a name for the profile.
A profile summarizes your parameter settings for cloud access.
●
Add
Adds the profile with the name edited on the left. The new profile is available for selection
in the "Profiles" drop-down list.
Profile selection
●
Profile
Drop-down list with all created profiles.
Select the profile you are using.
By selecting a profile, you download all settings of this profile to the WBM. You can edit
all settings as needed.
To use the selected profile for productive operation, select the "Enable profile" option at the
bottom of the page.
Change profile
When changing the profile, all previously configured topics or groups will be lost.
To change the profile, follow these steps:
1.
Disable the option "Enable profile" of the current profile and save it.
2.
In the "Profile" drop-drop-down list, select a different profile, set the option "Enable
profile" and save it.