Siemens 6GF3320-0HT01 Operating Instructions Manual Download Page 11

Page: 11 / 64

SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03

Description

2.1

Product package

SIMATIC MV320

The SIMATIC MV320 reader (article number 6GF3320-0HT01) is supplied with the following

components:

●

SIMATIC MV320 handheld reader

The reader can be used on the USB or RS-232 interface. To use the RS-232 interface, you

need to order the RS-232 cable and, if necessary, the appropriate power supply as

accessories.

SIMATIC MV325

The SIMATIC MV325 reader (article number 6GF3325-0HT01) is supplied with the following

components:

●

SIMATIC MV325 handheld reader with battery, charging station and USB cable (0.9 m)

The charging station has a USB interface and a Bluetooth wireless interface.

Summary of Contents for 6GF3320-0HT01

































































Search results

Summary of Contents for 6GF3320-0HT01

Reviews:

Related manuals for 6GF3320-0HT01

Brands by name

Popular brands

Siemens 6GF3320-0HT01, Operating Instructions Manual

Search results

Summary of Contents for 6GF3320-0HT01

Reviews:

Related manuals for 6GF3320-0HT01

Brands by name

Popular brands