Siemens 6GA7202-2AA10-1BF1, Operating Instructions Manual, Page: 69 / 168

If messages or warnings are active, they are displayed below the groups in the main window of
the start page.
Table 8-5 Reader status
Icon Description
Start The camera has the "Start" status. This means that the device is currently in
processing mode (RUN).
Stop The camera has the "Stop" status. This means that the device is currently
neither in processing mode nor in productive operation. The device is not
operating (STOP).
8.2 Application
8.2.1 Program
The "Program" menu allows you to set the type of processing that the camera executes in each
cycle. This task is the main task of the WBM and offers a wide range of options. These options
enable you to adapt the camera to suit a wide range of measuring tasks in line with your
requirements.
The "Program" menu includes the following functions:
• Create, edit, save and delete programs
Functions for program creation:
– Image acquisition functions
– Selection of lighting
– Parameterization of processing
• Program selection
• Start processing
• Check of settings and results in processing mode
Parameterization
8.2 Application
SIMOCRANE CenSOR
Operating Instructions, 07/2021
67