IO-Link digital input/digital output module DIQ 16x24VDC/0,5A 8xM12 (6ES7143-5AH00-0BL0)
Equipment Manual, 08/2021, A5E47926885-AB
21
Technical specifications
6
Technical specifications of the
DIQ 16x24VDC/0,5A 8xM12
IO-Link digital input/digital output
module
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
https://support.industry.siemens.com/cs/de/en/pv/6ES7143-5AH00-0BL0/td?dl=en
Article number
6ES7143-5AH00-0BL0
General information
Product type designation
DIQ 16X24VDC/0.5A, 8XM12
HW functional status
FS01
Firmware version
V1.0.x
Engineering with
•
IODD file
Yes
Supply voltage
Load voltage 1L+
•
Rated value (DC)
24 V; Supply from 1Us+ of the IO-Link master
•
permissible range, lower limit (DC)
18 V
•
permissible range, upper limit (DC)
30 V
•
Reverse polarity protection
Yes; against destruction
Load voltage 2L+
•
Rated value (DC)
24 V; Supply from 2UA+ of the IO-Link master
•
permissible range, lower limit (DC)
20.4 V
•
permissible range, upper limit (DC)
28.8 V
•
Reverse polarity protection
Yes; Against destruction; encoder power supply
outputs applied with reversed polarity, loads pick
up
Input current
Current consumption (rated value)
20 mA; without load
from load voltage 2L+, max.
4 A; Maximum value
Encoder supply
Number of outputs
8; Supply from 2UA+ of the IO-Link master
24 V encoder supply
•
Short-circuit protection
Yes; per module, electronic
•
Output current, max.
0.7 A; Total current of all encoders (depending on
IO-Link master supply via 2UA+)
Power loss
Power loss, typ.
4 W
Summary of Contents for 6ES7143-5AH00-0BL0
Page 1: ......
