Siemens 6ES7138-4CA01-0AA0, Manual

Page: 3 / 18

Power module PM-E DC24V (6ES7138-4CA01-0AA0)
Manual, 04/2007, A5E01119952-02
3
Preface
Purpose of the manual
This manual supplements the ET 200S Distributed I/O System Operating Instructions.
General functions for the ET 200S are described in the ET 200S Distributed I/O System
Operating Instructions ( http://support.automation.siemens.com/WW/view/en/1144348 ).
The information in this document along with the operating instructions enables you to
commission the ET 200S.
Basic knowledge requirements
To understand these operating instructions you should have general knowledge of
automation engineering.
Scope of the manual
This manual applies to this ET 200S module. It describes the components that are valid at
the time of publication.
Recycling and disposal
Thanks to the fact that it is low in contaminants, this ET 200S module is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste.
Additional support
If you have any questions relating to the products described in this manual and do not find
the answers in this document, please contact your local Siemens representative
( http://www.siemens.com/automation/partners ).
A guide to the technical documentation for the various SIMATIC products and systems is
available on the Internet. ( http://www.siemens.com/simatic-docu ).
The online catalog and ordering systems are available on the Internet
( http://www.siemens.com/automation/mall ).
Training center
We offer courses to help you get started with the ET 200S and the SIMATIC S7 automation
system. Please contact your regional training center or the central training center in
D -90327, Nuremberg, Germany ( http://www.siemens.com/sitrain ).