Siemens 6ES7 410-5FM08-0AB0, Equipment Manual, Page: 7 / 34

Introduction
2
Purpose of the operating instructions
Using the operating instructions, you will be able to install the synchronization modules and
establish the link.
This manual replaces the "Synchronization modules" section in the manuals for the following
products:
Product Article number
CPU 412–5H 6ES7 412–5HK06–0AB0
CPU 414–5H 6ES7 414–5HM06–0AB0
CPU 416–5H 6ES7 416–5HS06–0AB0
CPU 417–5H 6ES7 417–5HT06–0AB0
CPU 410–5H 6ES7 410–5HX08–0AB0
CPU 410E 6ES7 410–5HM08–0AB0
CPU 410 SMART 6ES7 410–5HN08–0AB0
CPU 410SIS 6ES7 410–5FM08–0AB0
You can find the manuals on the Internet pages of Siemens Industry Online Support ( https://
support.industry.siemens.com/cs/us/en/ ).
See also
SIMATIC Fault-tolerant systems S7-400H ( https://support.industry.siemens.com/cs/de/en/
view/82478488 )
SIMATIC PCS 7 Process Control System CPU 410 Process Automation ( https://
support.industry.siemens.com/cs/de/en/view/109748473 )
SIMATIC PCS 7 process control system CPU 410 Process Automation/CPU 410 SMART
( https://support.industry.siemens.com/cs/cn/en/view/109748474 )
SIMATIC process control system PCS neo CPU 410-5H Process Automation V10 ( https://
support.industry.siemens.com/cs/de/en/view/109773476 )
SIMATIC CPU 410SIS ( https://support.industry.siemens.com/cs/ww/en/view/109750080 )
Catalogs
You can find the article numbers for the Siemens products relevant here in the following catalog:
● Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog ( https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/
de&language=en )
You can request the catalogs and additional information from your Siemens representative.
Synchronization modules for S7-400H
Equipment Manual, 04/2020, A5E50072434-AA
7