Siemens 1NB1402-2AA84-4CA0-Z, Operating And Installation Instructions

Page: 101 / 156

Spare parts
10
10.1 Ordering data
In addition to the exact part designation, please specify the machine type and serial number
in all orders for spare parts. Ensure that the spare part designation matches that on the spare
parts list and make sure you use the appropriate part number as well.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type
● Serial number
The machine type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft extension at the drive end.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
WARNING
Explosion hazard due to unsuitable spare parts
If you use parts other than the original spare parts, the type of protection can no longer be
guaranteed. This can result in an explosion during operation in a potentially explosive
atmosphere. This can result in death, serious injury, or material damage.
● Use only original spare parts for explosion-proof machines, including components, such
as seals, terminals, cables, and cable entries. If you have any questions, please contact
the service center (Page 111).
● Commercially available equivalent standard parts such as screws and bolts may be used.
10.2 Ordering spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor spare parts quickly
and easily.
Spares on Web (
https://www.sow.siemens.com/ ).
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
Operating Instructions 06/2018
101