Siemens Nixdorf D970, Technical Manual

Page: 43 / 120

Menu Security
Settings in BIOS Setup
A26361-D970-Z120-3-7619
33
Power On/Off
calls the submenu in which you can specify how the system can be powered on and
off. These settings cause the system to be switched on and off in the same way as
using the on/off button on the system unit. The on/off button is always operable
and cannot be disabled.
PhoenixBIOS Setup
Security
Power On/Off Item Specific Help
Power Off Source
Software: [Enabled]
Keyboard: [Disabled]
Power On Source
Remote: [Enabled]
Keyboard: [Enabled]
Timer: [Enabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select
Ê
Sub-Menu F7 Previous Values
Example for submenu
Power On/Off
!
If you have assigned a system password in
System Mode
, the boot
procedure is suspended during remote power on of the system (using
Remote Power On
or
Timer On
) as the system waits for entry of the system
password. For this reason you should not assign a system password in
System Mode
if you want to use remote power on.
Power Off Source: Software
specifies whether the system can be switched off with a program (
DeskOff, SWOFF
)
or an operating system (
Windows 95, Windows NT with Siemens HAL
).
Enabled
The system can be switched off with the
SWOFF
program (default
entry).
Disabled
The system cannot be switched off with a program.