Siemens Nixdorf D970, Technical Manual

Page: 21 / 120

Main menu
Settings in BIOS Setup
A26361-D970-Z120-3-7619
11
Diskette A / Diskette B
These two fields are used to specify the type of floppy disk drive installed.
360K, 720K, 1.2M, 1.4M
,
2.8M
The entry depends on the floppy disk drive installed.
(Default entry Diskette A :
1.4M
).
(Default entry Diskette A : 1.4M).
1.4M
).
None
A floppy disk drive is not installed.
(Default entry for Diskette B:).
Hard Disk x
call the submenu to make corresponding settings of the IDE hard disk drive.
i
You should change the default settings only if you are connecting an
additional IDE drive.
The following description of the setting options for
Hard Disk 1
also applies to
Hard
Disk 2
. The default settings depend on the installed drive.
PhoenixBIOS Setup
Main
Hard Disk 1: 850 Mbyte Item Specific Help
Autotype Hard Disk: [Press Enter]
Type: [User]
Cylinders: [ 1647]
Heads: [ 16]
Sectors/Track: [ 63]
Write Precomp: None
Transfer Mode: [Standard]
LBA Translation: [Disabled]
PIO Mode: [Standard]
32 Bit I/O: [Enabled]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select Ê Sub-Menu F7 Previous Values
Example for the submenu
Hard Disk 1