Power - power-management features
Settings in BIOS Setup
A26361-D969-Z120-8-7619
43
Wakeup Event - Defining system activities
This field calls the submenu in which you can set the interrupts which are to be
evaluated as system activities. When one of these interrupts occurs, the active
energy saving mode is terminated, for example.
In a network environment the
Wakeup Event
for the network controller interrupt must
be disabled, otherwise the system will not switch to
Standby Mode
.
Phoenix BIOS Setup
Power
Wakeup Event
Item Specific Help
IRQ 1:
Enabled
IRQ 3:
[Disabled]
IRQ 4:
[Disabled]
IRQ 5:
[Disabled]
IRQ 6:
[Enabled]
IRQ 7:
[Disabled]
IRQ 8:
[Disabled]
IRQ 9:
[Disabled]
IRQ 10:
[Disabled]
IRQ 11:
[Disabled]
IRQ 12:
[Enabled]
IRQ 13:
Disabled
IRQ 14:
[Enabled]
IRQ 15:
[Enabled]
F1
Help
↑↓
Select Item
-/+
Change Values
F9 Setup Defaults
ESC Exit
← →
Select Menu
Enter Select
Ê
Sub-Menu
F7 Previous Values
Example for
Wakeup Event
submenu
Enabled
The associated interrupt is evaluated as a system activity.
Disabled
The associated interrupt has no effect on the active energy saving
mode.
