Siemens Nixdorf D969 Page 46 Technical Manual Download

Page: 46 / 92

Settings in BIOS Setup

Security - security features

A26361-D969-Z120-8-7619

Power-on Source: Timer

specifies whether the system can be timed to switch on at a particular time or after
a particular period of time.
The switch-on time cannot be specified in BIOS Setup. You require a suitable
program for setting this switch-on time.

Enabled

The system can be switched on at set times.

Disabled

The system cannot be switched on under timer control (default
entry).

Rebooting after a critical system error (

ASR&R Boot Delay

field in the

Server

menu) is not affected by this setting.

Chipcard

specifies whether the system can be switched on via the chipcard reader.

Enabled

The system can be switched on via the chipcard reader (default).
(Default entry.)

Disabled

The system cannot be switched on via the chipcard reader.

Summary of Contents for D969





























































































Search results

Summary of Contents for D969

Reviews:

Related manuals for D969

Brands by name

Popular brands

Siemens Nixdorf D969, Technical Manual

Search results

Summary of Contents for D969

Reviews:

Related manuals for D969

Brands by name

Popular brands