Siemens Nixdorf D969 Technical Manual Download

Page: 42 / 92

Settings in BIOS Setup

Security - security features

A26361-D969-Z120-8-7619

System Password Mode

specifies the effect of the system password. The setting in this field becomes
effective as soon as a system password is installed.

System

When the PC is started, the system password enables the
operating system to be booted.

Keyboard

When the PC is started, the operating system is booted and the
keyboard and mouse are locked. The system password unlocks the
keyboard and mouse.

System Load

This field specifies the drive from which the operating system can be loaded.

Standard

The operating system can be loaded from floppy disk or hard disk
(default entry).

Diskette Lock

The operating system can only be loaded from hard disk.

Setup Prompt - Setup message

specifies whether the setup message

Press F2 to enter SETUP

is displayed

when the system is rebooted.

Enabled

The setup message

Press F2 to enter SETUP

is displayed

when the system is started (default entry).

Disabled

The setup message is not displayed.

Summary of Contents for D969





























































































Search results

Summary of Contents for D969

Reviews:

Related manuals for D969

Brands by name

Popular brands

Siemens Nixdorf D969, Technical Manual

Search results

Summary of Contents for D969

Reviews:

Related manuals for D969

Brands by name

Popular brands