Settings in BIOS Setup
Advanced
- Advanced system configuration
24
A26361-D969-Z120-8-7619
Serial 1 / Serial 2 - Serial ports
This field selects the address and the interrupt used to access the relevant serial
port.
3F8h, IRQ4
,
2F8h, IRQ3
,
3E8h, IRQ4
,
2E8h, IRQ3
,
The serial port is set to the shown address and interrupt.
Auto
The serial interface is automatically set to the next available
combination (address, interrupt) (Default entry).
Disabled
The serial port is disabled.
Serial 2 Mode - Serial interfaces
This field defines whether the second serial port is used as the standard port or as
the infrared interface.
If you wish to use infrared data transfer, an infrared port with the associated
hardware must be incorporated in the device.
Standard
The port operates as a serial port (default entry).
IRDA
(Infra-Red Data Association) The serial port permits infrared data
transfer up to 115 kbit/s. External serial port 2 does not function.
Parallel - parallel port
This field selects the address and the interrupt used to access the parallel port.
378h, IRQ7
,
278h, IRQ5
,
3BCh, IRQ7
The parallel port is set to the shown address and interrupt.
Auto
The parallel interface is automatically set to the next available
combination (address, interrupt) (Default entry).
Disabled
The parallel port is disabled.
