Siemens Healthcare XPRECIA STRIDE, User Manual, Page: 15 / 59

20 21
Xprecia Stride User Guide 1. Exploring Stride
General action
SCAN
Scan
Use the barcode reader to scan lot information,
an Operator ID, or a Patient ID.
Help
Displays help information for a task or
the current screen.
Keypad
Use the keypad to enter information.
Scanner
Use the barcode reader to scan information.
Keypad screens
Alphabetic keypad
Tap to display the alphabetic keypad to enter
lowercase and uppercase letters.
#+=
Extended keypad
Tap to display the extended keypad to enter special
characters.
Numeric keypad
Tap to display the numeric keypad to enter numbers.
Spacebar
Tap to enter a space.
Delete
Tap to delete a letter, number, or character you
entered.
Uppercase
Tap to enter uppercase letters.
Lowercase
Tap to enter lowercase letters.
Accept
Tap to accept your entry.
Learning about the Stride barcode reader
When Stride requires information it prompts you to use the
barcode reader. The barcode reader enables you to easily
scan important information about the test strips and test
strip vials that you are currently using directly into Stride.
This information includes calibration, control range, the lot
number, and expiration date. You can also use the barcode
reader to enter an Operator ID (OID), Patient ID (PID), and a
control lot number.
Operating the barcode reader
INSTRUCTIONS
1. Hold the analyzer 10 cm (4 inches) from
the barcode.
2. Aim the barcode reader at the item you want to scan
(test strip vial, test strip, or QC vial).
3. Tap
SCAN
.
Tip An audible tone sounds, a check mark displays,
and the screen changes when the barcode is accepted.