02.2019
54
/
64
H39.MFVRS009EN-00
Multi-point locks, key operated
Assembly instructions
BS 6000 OF/OR, BS 6000, BS 6600
6.2
Correct the G adjustment (top striker plate)
The G adjustment is performed by moving two eccentric screws [1] laterally by
± 1.5 mm. This lateral adjustment changes the contact pressure of the door
on the frame seal.
1
4 mm
If the contact pressure of the door
on the frame seal is too low, the G
adjustment must be moved in the
direction of the frame seal.
If the contact pressure of the door
on the frame seal is too high, the G
adjustment must be moved in the
direction of the frame.
The default setting of the G adjust-
ment is in neutral position. The
hexagon socket of the eccentric
screws is pointing downwards.
The max. adjustability of 1.5 mm of
the G adjustment is reached when
the marking is in a 90° position.
2 x
f
Close the door and lock with
a double turn.
f
The conical locking element
moves into the G adjustment
and laterally presses the door
against the seal.
