5/20
H39.MFVRS012EN-01
03.2020
KFV – Assembly instructions
Multi-point locks, key operated, main lock set
1.8
Symbols used
The following icons are used in this document:
General warning symbol
Useful information or advice
Do not use mechanical force
Other types of indicators
Below is a list of symbols used in these instructions and
their meanings:
•
Items of text following this marker are found in lists.
–
Items of text following this marker are found in
subordinate lists.
f
Items of text with this marking in front of them are
instructions that must be followed in the specified
order.
Cross reference
„“ A separate cross reference is enclosed by quotati
-
on marks.
() A cross reference in the flow text is enclosed by
brackets.
1.9
Aligning the frame parts and main lock in
the door
The distances and dimensions of the latch and
deadbolt must be compatible with those of the frame
part.
If the dimensions are not compatible, the frame part
will need to be replaced, reworked or offset.
1.10
Applicable documents
For the installation of the main lock set, it is essential
to observe all assembly and operating instructions that
are enclosed with other (optional) components. The
instructions of the door manufacturer and for other
accessories from other manufacturers are also
applicable.
To operate the main lock, download the operating instructions
for BS 220X/230X/250X/260X from the download portal of our
website
1.11
Appropriate disposal
Do not dispose of the main lock set in the household
waste. Comply with the current local and national
regulations.
The packaging consists of raw materials that can be
recycled and can be taken to the local waste paper
disposal site.
