Siegenia A 1100, Operating Instructions Manual, Page: 4 / 16

03.2020 4/16 H47.MFVRS006EN-01
KFV – Operating instructions
Multi-point locks, key operated, key operated, BS 2100, BS 2800, A 1100, A 1800
1 Introduction
Read these instructions completely before you use the
multi-point locks.
To safely use the multi-point locks BS 2100 and
BS 2800, adhere to the defined operating instructions
in order to prevent functional disorders or damage.
Follow the notes in Chapter 2 "Safety", in order to
prevent personal injury or damage.
1.1 Manufacturer and Service
KFV Karl Fliether GmbH & Co. KG
A company of the SIEGENIA GROUP
Siemensstraße 10
42551 Velbert
Tel.: +49 2051 278-0
Fax: +49 2051 278-167
E-Mail: info@kfv.de
Please contact your retail partner in case of complaints
or service requirement.
1.2 Target group of this documentation
These instructions are intended for end users.
1.3 Intended use
• The multi-point lock is suitable for use in single-sash
and double-sash doors in permanent buildings.
• The multi-point lock may only be installed in doors
that have been fitted in a technically sound manner.
• The door design must permit use of the multi-point
lock.
1.4 Locking part and hardware
• Repair of the multi-point lock is not permissible.
If the multi-point lock is damaged, it must be repai -
red or replaced by KFV or by a specialist company.
• Use only KFV frame parts.
1.5 Improper use
• The multi-point lock must not be used for escape
doors.
• The multi-point lock must not be used in doors for
wet rooms or rooms in which the air contains
aggressive or corrosive components.
• Foreign objects and/or materials which impede or
prevent proper use must not be placed within the
opening range, the locking system or the striker
plates.
• Do not interfere with and/or make any
modifications to the multi-point lock.
1.6 Service notes
• Check that all moving components are functioning
properly once a year.
• Please get in touch with your contractual partner if
you notice malfunction or damage.
1.7 Dimensions
All measurements are given in mm.
1.8 Symbols used
The following icons are used in this document:
Information
Do not use mechanical force
Continue reading the instructions
at the corresponding point
Other types of indicators
Below is a list of symbols used in these instructions and
their meanings:
• Items of text following this marker are found in lists.
– Items of text following this marker are found
in subordinate lists.
f
Items of text with this marking in front of them are
instructions that must be followed in the specified
order.
Cross reference
„“ A separate cross reference is enclosed by
quotation marks.
() A cross reference in the flow text is enclosed by
brackets.
1.9 Appropriate disposal
• The multi-point lock and the optional accessories
should not be disposed of with household waste.
Comply with the current local and national
regulations.
• The packaging consists of raw materials that can be
recycled and can be taken to the local waste paper
disposal site.