BAL XC420 2.00
30/47
Selection of the display or the gateway with Ethernet connection
By clicking the button 'Search' button, the recognition of the display can be started new at any time.
In the field 'IP address' you can enter the IP address of the display manually. Then click the 'Add'
button, so that the display is added to the display list.
By activating the option 'Virtual display' a fictive display is added to the display list. If you perform the
configuration of this fictional display the parameterization is saved in a file.
By clicking the button 'Next', the parameters of the selected display are read out
IP address
Make sure that your PC and the display are in the same network segment. Displays outside the network
segment of your PC are recognized, but a connection is not possible. If necessary adjust the IP address of
your PC to the IP address of the display.
