SIEB & MEYER 0460123A, Manual, Page: 27 / 30

Machine software 20-13-xxF and higher with PC software 8.145M and higher
Number of Z-
axes
CPU
48.01.0012.1
Var. B = 2 MB
From CPU
48.01.0012.2
Var. A = 2 MB
Var. B = 4 MB
CPU 48.01.0022
var. A = 2 MB
var. B = 4 MB
CNC 46.00
46.01.0001 = 2 MB
1 x x x x
2 x x x x
3 x x x x
4 x x x x
5 x x x x
6 x x x x
7 x
8 x
Note for machine software version 20-xx-xx:
Only the above mentioned CPU cards support the software version with the
number of indicated Z-axes for operation with the USB↔ISA adapter. For this
reason, a hardware upgrade may be necessary to ensure troublefree opera‐
tion and fast operability of the CNC.
This hardware upgrade is mandatory for machines with 5 or more Z-axes, if
not available already.
The following window appears after the installation has been completed:
Activate the option "No, I will restart my computer later".
The current version of the PC software for the operation of the CNC modules
0460123A, 0480123A and 0480123D will be installed on the PC.
Installation of the USB Driver
Backup files for system recovery
To recover the original state of your system after driver installation (user-specific
settings, passwords etc.) you must create backup files of the following files before you
start the drive installation.
▶ All files of the following directories:
─ “C:\smwprog\softc1”
W
Software and Driver Installation
0460123A/0480123A/0480123D - 27
6