Connector Pin Assignment
6
Connector Pin Assignment
6.1
Connectors
Fig. 5: Connectors of the series 0362171DA1xxxx/ 0362171DB1xxxx
Note
You can order the appropriate connector kit for SD2B plus at SIEB & MEYER (article No.
32299587).
6.2
Operation of the Terminal Connectors
6.2.1
Spring-cage Connection
The individual conductors are fixed in the terminal by
means of spring-cage connection. In order to plug and
unplug a conductor proceed as follows:
▸
Push a screwdriver into the designated groove
above the chamber to operate the spring-cage
connection as shown in the figure.
▸
Put the conductor into the chamber / remove the
conductor from the chamber.
▸
Release the screwdriver.
24
Drive Amplifier SD2B plus - 0362171DA1xxxx, 0362171DB1xxxx
