EN SICO KITCHENWARE®
NATURAL LABORATORY FOR VACUUM PACKAGE EN
MANUFACTURER : BISVA SRL TITO PZ ITALIA
5
BAGS CARE
Before buying bags, make sure of their suitability to vacuum preservation. S.I.C.O. KITCHENWARE® assures the
suitability of its items to vacuum preservation. It is essential to take great care of the bags used
before and after
vacuum-packing. Accidental piercing would make these bags useless. When vacuum-packing food with points or
acuminated protrusions, remember to wrap it in soft paper napkins and/or silver paper so as to protect the whole
bag. It is advisable to keep them far from children.
VACUUM PACKING IN CONTAINERS
S.I.C.O. KITCHENWARE offers different lids which allow to vacuum-pack by using containers characterized by
the capacity you need. Apart from the lids, you need another accessory called “vacuum handle“. Remember not
to fill the container and leave 3 cm. at least from the upper rim
WARNING: USE POLYCARBONATE, TEMPERATE GLASS, STEEL CONTAINERS ONLY
BECAUSE THEY DO NOT IMPLODE UNDER THE DEPRESSION CAUSED BY THE VACUUM
PUMP.
POLYCARBONATE LIDS
ACCESSORIES CARE
All accessories must be cleaned carefully before being used. It is advisable to use warm water and mild
dishwashing soap
TROUBLESHOOTING
PROBLEM
SOLUTION
Even if the general switch (1)
is placed on position ON, it
does not lighten.
Make sure that the plug is properly inserted in the socket.
Make sure that the cable and/or the plug are not damaged.
Make sure that the plug supplies electric energy.
Step 3
.
When the vacuum gauge (4)
reaches the MAX value, it will be possible to
remove the vacuum handle from the lid. It is
possible to go on sealing or positioning the
selector (5) on 0 to switch the pump off.
Step 2
.
Program the
selector (5) on position
JARS to vacuum-pack
containers. The pump
will be set in motion.
Insert the handle on the
lid and press.
Step 1
.
Plug the
appliance in, lift the
lid (11) and position
the general switch
(1) on position ON.
Put the handle pipe
into
the
proper
accessory port (16).
Check
the
presence of the
silicone valve on
the lid.
Step 4
.
To open a vacuum-
packing container, use your
fingers to remove the silicone
valve placed where you had
inserted
the
handle
to
vacuum-pack so as to allow
the entry of air and the
opening of the lid. Always
leave the valve o the lid.
.
Vacuum Handle