manualshive.com logo in svg

SICK ZIRKOR200 Ex-G, Operating Instructions Manual

Share
Download
SICK ZIRKOR200 Ex-G Operating Instructions Manual Download Page 23

23

8024250/18HT/V2-0/2020-12| SICK

O P E R A T I N G   I N S T R U C T I O N S   |  ZIRKOR200  Ex-G

Subject to change without notice

PRODUCT DESCRIPTION

3

3.4

Device variants

●

Analyzer unit, standard

●

Analyzer unit, with cooling protection pipe

3.5

Options

●

Analyzer unit: Manually operated valve for test gas feeding mounted in Ex-area

●

Analyzer unit: Solenoid valve for test gas feeding mounted in Ex-area

●

Pneumatic unit, manual, mounted in Ex-area

●

Pneumatic unit, automatic, mounted in Ex-area 

●

Counter flange

●

Various interfaces (RS-232, RS485, HART, Fieldbus)

3.6

Expansion modules

The electronics are also available optionally with different interfaces (RS-232, RS485, 
HART, Fieldbus). If you have ordered one of these options, a separate Manual/Specification 
for this interface is included with the delivery.

Summary of Contents for ZIRKOR200 Ex-G





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands