You can also set whether or not the device should send notifications (events or PD
Invalid flag) to the master.
7.5.6
SMART TASK page
On the SMART TASK page of the WI180C-IOA00, you can apply the available logic func‐
tions to the input signals and transmit the results on the Smart Task output signals QL1
or QL2 by arranging the logic gates and connecting lines using drag and drop.
All available inputs are shown on the left-hand side of the screen. The available logic
gates are displayed on the bar at the top center and can be dragged downwards into
the working area of the screen. The configured outputs are listed on the right-hand side.
7
OPERATION
24
O P E R A T I N G I N S T R U C T I O N S | WI180C-IOA00
8025143/2020-01-23 | SICK
Subject to change without notice
