8
FAULT DIAGNOSIS
114
8023994-17I6/2020-03-19|SICK
O R I G I N A L O P E R A T I N G I N S T R U C T I O N S | VMS4100/5100
Subject to change without notice
8.3
Detailed fault analysis
The SIM2000 system controller outputs faults in a staggered manner in reports.
This means that a more detailed analysis is always possible.
•
Communication errors can, for example, occur when transmitting telegrams to the
SIM2000 system controller. The SIM2000 system controller then returns a fault code.
•
For faults that occur during measuring or reading, fault codes are written to a
status log
.
The status log distinguishes between four types of reports:
•
Information
•
Warning
•
Error
•
Critical fault
The system saves only the last five entries for each report type.
Information
and
Warning
reports are deleted after a restart.
▸
Call up the status log using the SOPAS configuration software.
▸
To do this, install SOPAS on a PC and connect the PC to the SIM2000 via Ethernet.
NOTE!
Please contact SICK Support for a more detailed analysis of the fault situation.
Report types
Calling up the
status log