3 D D R I V E R A S S I S TA N C E S Y S T E M | V I S I O N A R Y - B
8022960/ 2018-07-16| SICK AG
Subject to change without notice
7 2
MOUNTING
5
Mounting
5.1
Safety
CAUTION!
Risk of device falling down.
The sensor head may fall down if it is not mounted properly, causing minor to moderate
injuries.
• It is essential that only suitable mounting accessories are used.
5.2
Required tools
IMPORTANT!
Tools for securing the sensor head in the mounting location must be used during moun-
ting. The sensor head is always mounted on a metal frame. If the sensor head is being
mounted on other accessories, some of the tools and accessories may differ from those
described here.
•
Drilling machine
•
Socket set or torque screwdriver, ring wrench
•
Set of Allen keys (standard sizes)
•
Selection of metal drills
5.3
Required accessories
IMPORTANT!
The accessories listed are the minimum requirements. More and different accessories
may be needed depending on the type of mounting.
•
Cable hose (slotted) resistant to temperature and weather
•
Sufficiently dimensioned and appropriate fastening and mounting accessories
(e.g., cable clamps, insulating tape, cable ties)
5.4
Accessories
IMPORTANT!
The connection cable between the evaluation unit and the sensor head is a mandatory
requirement for the mounting process. Various lengths are available.
You need two cable sets for kit B and kit C.
Part number
Description
2098100
Cable set for connecting the sensor head and evaluation unit (3 m)
2098101
Cable set for connecting the sensor head and evaluation unit (5 m)
2098102
Cable set for connecting the sensor head and evaluation unit (10 m)
