SICK TRANSIC Extractive TRANSIC151LP, Operating Instructions Manual, Page: 74 / 84

74 8015383/ZUQ7/V1-3/2020-06 | SICK O P E R A T I N G I N S T R U C T I O N S | TRANSIC151LP
Subject to change without notice
10
SPECIFICATIONS
10.4.2 Measured value recording
10.4.3 Ambient conditions
Measuring ranges (scalable)
– In-situ and extractive version
– Version for ambient gas measurement
0 … 21 vol% O
2
2 … 21 vol% O
2
Precision ±0.2 vol% O
2
Temperature dependence in T-range ±2 vol% of measured value, max. dT/dt 1 °C/min
Stability Zero point drift ±0.1 vol% O
2
/ year
Reference gas drift ±0.8 vol% from measured value /
year
Measurement response time (T
63
/T
90
) in still air
– without filter
– with stainless steel mesh
– with stainless steel mesh and PTFE 10 s / 20 s
10 s / 25 s
30 s / 70 s
Operating pressure range 0.8 … 1.4 bar(a)
Start time 2.5 min
Warming up time (according to specification) 3 min
Display 7-segment LCD
LED Three-colored: Red/yellow/green
Operation location Outdoors or indoors.
No direct sunlight.
Use a weather hood when necessary.
Operating temperature range
– for probe (installed in process)
– for electronics (housing)
– for TRANSIC151LP voltage supply unit
– for TRANSIC151LP (ambient air measurement)
− 20 … +80 °C
− 20 … +60 °C
− 20 … +60 °C
− 20 … +60 °C
Storage temperature range − 40 … +80 °C
Operating pressure range 0.8 … 1.4 bar(a)
Air humidity 100% r.h. non-condensing
Altitude Up to 2000 above sea level
Electrical compliance In accordance with DIN EN IEC 61010-1:2011
Safety information Laser product of protection class 1; see see “Main
operating information”, page 8 for information on eye-
safe use of the TRANSIC151LP.