3
PRODUCT DESCRIPTION
16
SAFETY-RELATED 2D LIDAR SENSOR | TIM361S
8022483/108R/2018-07-09 | SICK
Subject to change without notice
3.5
Safety characteristic values
The TiM361S safety-related laser scanner has the following safety characteristic values
per EN ISO 13849-1:2015:
Performance level (PL): b
Category (Cat.): B
Mean Time To Dangerous Failure (MTTF
D
): 100 years
(at 25° ambient temperature)
Mission Time (MT) (period of use): 10 years
3.6
Safety-related detection capability
With the TiM361S safety-related laser scanner, with its emission wavelength, the
following objects can be reliably and safely detected up to a relative speed of 1.6 m/s
and at min. 5% remission:
Objects 50 mm in diameter and 400 mm in length (standing up) at a distance of
0.05 m up to max. 1.5 m with a horizontal protective field
Objects 70 mm in diameter and 400 mm in length (standing up) at a distance of
0.05 m up to max. 2 m with a horizontal protective field
Objects 200 mm in diameter and 600 mm in length in or penetrating a vertical
protective field and those lying on the ground with a horizontal protective field, at
a distance of 0.05 m up to max. 4 m
Restrictions
The safety-related detection capability (determined by the measurement procedure)
can be impaired for measurement of objects with edges and/or corners and/or those
moving too quickly. This can result in incorrect distance values, causing impairment,
reduction or complete loss of detection capability, and the device no longer being able
to perform its function.
Blind zone
No objects will be detected within a range of 0.05 m from the measurement origin,
across the entire scanning range of the TIM361S!
NOTE
Due to the necessary system reserve of the TiM361S, its detection range and/or
system range is greater than the assured distances for safety-related detection.
This system reserve
must not
be used for safety-related analysis!
