background image

1

2

1

Device

2

Laser pulse

0

60

120

180

240

300

0

2000

3000

5000

7000

4000

6000

9000

8000

1000

10000

Range (mm) 

2

Spot diameter (mm) 

1

Spot diameter of a submeasuring point.
Divergence 9 mrad, spot diameter on the front screen 6 mm 

3

  

Elongation of the overlayed submeasuring points in direction of deflection 
at angle step 1°.
Divergence 26.5 mrad, spot diameter on the front screen 6 mm 

4

1

Spot diameter (mm)

2

Range (mm)

3

Spot diameter of a submeasuring point.

Divergence 9 mrad, spot diameter on the front screen 6 mm

4

Elongation of the overlayed submeasuring points in direction of deflection at angle step
1°.

Divergence 26.5 mrad, spot diameter on the front screen 6 mm

3.2

Particle filter

By using a digital particle filter to pre-process and optimize the measured distance
values, the device can be tailored to the specific requirements of the respective appli‐
cation.

The particle filter blanks small, irrelevant reflection pulses in dusty environments which
are caused by dust particles or the like. In doing so, successive scans are continuously
evaluated in order to detect static objects.

PRODUCT DESCRIPTION 

3

8020631/1DWW/2022-08 | SICK

O P E R A T I N G   I N S T R U C T I O N S | TiM1xx

11

Subject to change without notice

Summary of Contents for TiM1 Series





































Reviews: