O P E R A T I N G I N S T R U C T I O N S | T - E A S I C
®
8023072/1E22/2022-02-23| SICK AG
Subject to change without notice
3 3
7
COMMISSIONING
Switching output behavior
Flow/temperature
t
SP1
SP2
active
inactive
Fig. 23: Normally open with window function
7.3.8
Normally closed with window function
Configuration based on Q1 for flow (example)
1. Use the arrow keys (left/right) to select
Q1 Mode
.
2. Use the arrow keys (up/down) to select
Flow window norm closed
.
3. Use the right arrow key to select
Q1 Switchpoint 1
(SP1).
4. Increase or decrease the value using the arrow keys (up/down).
5. Use the right arrow key to select
Q1 Switchpoint 2
(SP2).
6. Increase or decrease the value using the arrow keys (up/down).
7. The sensor uses the larger switchpoint as the upper switching threshold, and the
smaller switchpoint as the lower switching threshold.
8.
If required, configure the delay mode and time (see
).
Switching output behavior
Flow/temperature
t
SP1
SP2
active
inactive
Fig. 24: Normally closed with window function
