Operating instructions IO-Link USB Master SiLink2 Master
Safety
8
© SICK AG • Presence Detection • Subject to change without notice • 8017387
2.3
Requirements for Qualified Personnel
WARNING!
Damage to the device in the event of improper
handling!
Improper handling may lead to physical damage.
Therefore:
• All work must only ever be carried out by the stipulated
persons.
The operating instructions state the following qualification requirements for
the various areas of work:
•
Qualified personnel
are able to carry out the work assigned to them and independently
recognize potential risks due to their specialist training, knowledge and
experience, as well as knowledge of the relevant regulations.
•
Electrical specialists
are able to carry out work on electrical systems and independently
recognize potential risks due to their specialist training, knowledge
and experience, as well as knowledge of the relevant standards and
regulations.
In Germany, the electrical specialist must satisfy the regulations of the
work safety regulation BGV A3 (e.g., master electrician). Corresponding
regulations, which must be observed, apply in other countries.
