3
Product description
3.1
Product identification
The part number of the safety system is located on the packaging.
Further topics
•
"Ordering information", page 52
3.2
Design of the safety system
The safety system from SICK comprises the following components:
•
1 × S300 Mini Standard, microScan3 Core I/O or S3000 Standard safety laser
scanner
•
1 x deTec4 Core or deTem4 Core primary protective device
•
1 x FlexFix bracket for sender and receiver of the primary protective device
•
1 × Flexi Classic safety controller:
°
1 × Flexi Classic main module UE410-MU4T0
or
°
1 × Flexi Classic main module UE410-MU4T0 and input expansion module
8DI
•
Macro for ePlan
•
Operating instructions for download
•
SISTEMA file
3.3
Limits of the safety system
The safety system ends at all inputs and outputs that are not used to wire the compo‐
nents of the safety system.
For detailed information about the interfaces
see "Electrical installation", page 38
.
The limits of the safety system are presented in abstract and general terms in the figure
below:
1
3
2
7
4
5
6
Figure 1: Limits of the safety system
1
Sensors
2
Logic (safety controller)
3
Sub-safety function
4
Wiring between sensors and logic
5
Wiring between safety system components and components outside the safety system
6
Limit of the safety system
7
Components outside the safety system, e.g., actuators, robot controller, or higher-level
controller
3
PRODUCT DESCRIPTION
12
O P E R A T I N G I N S T R U C T I O N S | sBot Stop
8023421/12KF/2019-01-22 | SICK
Subject to change without notice
