7.2.6
Mount bracket for z-axis rotation (roll)
Note
: for an example of sensor installation, see
Examples of sensor installation on the
The bracket that allows rotation around the z-axis (roll) is an accessory in the package.
To mount it:
1. Unscrew the screw at the
bottom and remove the bracket
with the sensor and the aligning
ring.
2. Attach the roll bracket to the
base. Use the tamper-proof
screw provided with the
bracket.
3. Mount the bracket with the
sensor and the aligning ring.
Use the tamper-proof screw
provided with the bracket.
7 INSTALLATION AND USE PROCEDURES
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
69
