© SICK AG • Presence Detection • Subject to change without notice • 8015887
7
Operating instructions Register sensors RS25
General information
1 General information
1.1
Information regarding the operating instructions
These operating instructions provide important information on how to
handle the RS25-WF334000 and RS25-WL334000 register sensors from
SICK AG. Adherence to all the specified safety instructions and guidelines
is a prerequisite for working safely.
You must also comply with any local work safety regulations and general
safety specifications applicable to the use of the register sensor.
Ensure that you read through these operating instructions carefully before
starting any work. They constitute an integral part of the product and
should be stored in the direct vicinity of the register sensor so they remain
accessible to personnel at all times.
Should the register sensor be passed on to a third party, these operating
instructions should be handed over with it.
Danger of explosion at non-
observance of the safety
notes and incorrect handling –
RS25-WL334000
ATEX
DANGER!
Danger of explosion at non-observance of the safety
notes and incorrect handling RS25-WL334000!
Danger of explosion at non-observance of the en-
closed safety notes and incorrect handling of the
RS25-WL334000.
For this reason:
• Read and observe the following safety notes for appli-
cations in the potentially explosive area:
• ATEX related Operating instructions for
RS25-WL334000
• ATEX General Information/Safety instructions
• ATEX related Technical data.
