Operating instructions Register sensors RS25
Transport and storage
20
© SICK AG • Presence Detection • Subject to change without notice • 8015887
5 Transport and storage
5.1
Transport
Improper transport
ATTENTION
Damage to the register sensor due to improper
transport
Considerable material damage may occur in the event of
improper transport.
For this reason:
• Register sensors should only be transported by trained
specialist staff.
• The utmost care and attention is required at all times
during unloading and transportation on company
premises.
• Note the symbols on the packaging.
• Do not remove packaging until immediately before you
start mounting.
5.2
Transport inspection
Improper transport
Upon delivery, please check the delivery for completeness and for any dam-
age that may have occurred during transportation.
In the case of transportation damage that is visible externally, proceed as
follows:
• Do not accept the delivery or only do so conditionally.
• Note the scope of damage on the transport documents or on the trans-
port company's delivery note.
• Submit a complaint.
NOTE
Complaints regarding defects should be filed as soon
as these are detected. Claims for replacement due to
damage are only valid before the applicable complaint
deadlines.
