manualshive.com logo in svg

SICK ReLy OSSD2, Operating Instructions Manual

Share
Download
SICK ReLy OSSD2 Operating Instructions Manual Download Page 34

14

List of tables

1.

Safety relay indicators................................................................................................ 10

2.

Switching behavior of application diagnostic output Y1.......................................... 13

3.

Pin assignment of the terminals................................................................................20

4.

Fault indicators and operational statuses................................................................ 23

5.

Safety-related parameters......................................................................................... 25

6.

Mechanical data......................................................................................................... 25

7.

Electrical data - operating data..................................................................................26

8.

Electrical data - inputs (I1, I2, S1)............................................................................. 26

9.

Electrical data - test pulse output (R1)......................................................................26

10. Electrical data - application diagnostic output (Y1, Y2)........................................... 27
11. Electrical data - enabling current paths (13, 14, 23, 24)........................................ 27
12. Ambient data...............................................................................................................27
13. Ordering information.................................................................................................. 31

14 

LIST OF TABLES

34

O P E R A T I N G   I N S T R U C T I O N S | ReLy OSSD2

8020864/15W3/2020-02-21 | SICK

Subject to change without notice

Summary of Contents for ReLy OSSD2





































Reviews:

No comments

Brands by name

Popular brands

Load more brands