Chapter
6
Operating instructions
RFID Access Management
64
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
Commissioning RFID Access
Management
6.10.4
Modifying an access point
The list of access points can be amended and edited at any time. You may need to edit an
access point if its connection type has changed, for example.
NOTE
Please note: You can only modify access points that have not yet been used in an access
profile.
If the access point is already in use, you cannot save the changes. In such cases, you will
receive a notification informing you of this.
1. Log in to RFID Access Management with the
Integrator
user role.
2. Click the
Configuration
icon and switch to the
Access Point
tab.
3. Select the access point that you wish to modify.
4. Click the
Modify
button. The fields at the bottom are enabled so you can make the
entry.
5. Adapt the settings accordingly.
6. Click
Save
to complete the entry.
