SICK PowerProx Mini WTT4SLC, Operating Instructions Manual

Page: 34 / 200

NOTE
Static charge may cause dust particles to stick to the light emission window. This effect
can be avoided by using an anti-static glass cleaner in combination with the SICK lens
cloth (can be obtained from
www.sick.com ).
NOTE
If the light emission window is scratched or damaged (cracked or broken), the device
must be replaced. Contact SICK Service to arrange this.
Cleaning the housing
In order to ensure that the heat produced by the internal power loss is adequately
dissipated, the housing surface must be kept clean.
9 Decommissioning
9.1 Disassembly and disposal
Disassembling the device
1. Switch off the supply voltage to the device.
2. Detach all connecting cables from the device.
3. If the device is being replaced, mark its position and alignment on the bracket or
surroundings.
4. Detach the device from the bracket.
Disposing of the device
Any device which can no longer be used must be disposed of in an environmentally
friendly manner in accordance with the applicable country-specific waste disposal regu‐
lations. As it is categorized as electronic waste, the device must never be disposed of
with household waste.
9.2 Returning devices
b
Do not dispatch devices to the SICK Service department without consultation.
NOTE
To enable efficient processing and allow us to determine the cause quickly, please
include the following when making a return:
■
Details of the contact person
■
Description of the application
■
Description of the fault that occurred
10 Technical data
10.1 Technical data
Speed Distance
Type of light Laser
1)
maximum pulse power < 500 mW
Pulse length ≤ 2 ns
Wavelength 658 nm
OPERATING INSTRUCTIONS
34 O P E R A T I N G I N S T R U C T I O N S | PowerProx Mini - WTT4SLC 8022570.1FBN/15.09.2022 | SICK
Subject to change without notice
en