manualshive.com logo in svg

SICK outdoorScan3 Core I/O, Operating Instructions Manual

Share
Download
SICK outdoorScan3 Core I/O Operating Instructions Manual Download Page 9

•

Guide for Safe Machinery (six steps to a safe machine)

•

Safety Designer (software for configuring the safety laser scanner and further
safety solutions)

1.5

Symbols and document conventions

The following symbols and conventions are used in this document:

Safety notes and other notes

DANGER

Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.

WARNING

Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.

CAUTION

Indicates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.

NOTICE

Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.

NOTE

Indicates useful tips and recommendations.

Instructions to action

b

The arrow denotes instructions to action.

1.

The sequence of instructions for action is numbered.

2.

Follow the order in which the numbered instructions are given.

✓

The check mark denotes the result of an instruction.

LED symbols

These symbols indicate the status of an LED:

o

The LED is off.

Ö

The LED is flashing.

O

The LED is illuminated continuously.

ABOUT THIS DOCUMENT 

1

8023152/160F/2019-11-14 | SICK

O P E R A T I N G   I N S T R U C T I O N S | outdoorScan3 Core I/O

9

Subject to change without notice

Summary of Contents for outdoorScan3 Core I/O

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands