manualshive.com logo in svg

SICK outdoorScan3 Core I/O, Operating Instructions Manual

Share
Download
SICK outdoorScan3 Core I/O Operating Instructions Manual Download Page 21

Figure 10: Monitoring case 2 with field set 2

3.3

Example applications

Important information

DANGER

Hazard due to lack of effectiveness of the protective device
Persons or parts of the body to be protected may not be recognized or not recognized in
time in case of non-observance.

b

Only use the safety laser scanner in outdoor applications as follows:

°

Hazardous area protection (stationary or mobile)

°

Horizontal scan plane

°

Leg detection and detection of persons in a lying position

Hazardous area protection

In hazardous area protection, people are detected if they stay in a defined area.

This type of protective device is suitable for machines, where it is possible to see a haz‐
ardous area completely from the reset pushbutton. When the hazardous area is
entered, a stop signal is triggered and starting is prevented.

PRODUCT DESCRIPTION 

3

8023152/160F/2019-11-14 | SICK

O P E R A T I N G   I N S T R U C T I O N S | outdoorScan3 Core I/O

21

Subject to change without notice

Summary of Contents for outdoorScan3 Core I/O

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands